Tag: M.W:100-200

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.16874-33-2,Tetrahydrofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

Step 1: Synthesis of ethyl tetrahydrofuran-2-carboxylate:To a stirred solution of tetrahydrofuran-2-carboxylic acid (about 10 g) in ethanol (150 ml), sulfuric acid (about 10 ml) was added and refluxed for 6 hours at 80 C. Completion of the reaction was monitored by TLC, reaction mixture was evaporated under reduced pressure, the residue was taken in water, neutralized with saturated NaHC03 and extracted with DCM, the organic layer was dried over a2S04 and concentrated under reduced pressure. The residue was purified by silica gel column chromatography using 5% ethyl acetate in hexane as eluent to furnish the title compound (12 g) as a light yellow liquid. NMR (300 MHz, CDC13): 1.22- 1.27 (m, 3H); 1.57- 1.87 (m, 8H); 2.65-2.76 (m, 1H); 4.08-4.15 (m, 2H); ES Mass: [M+l ] 143 (100%)., 16874-33-2

As the paragraph descriping shows that 16874-33-2 is playing an increasingly important role.

Reference£º
Patent; HETERO RESEARCH FOUNDATION; PARTHASARADHI REDDY, Bandi; VAMSI KRISHNA, Bandi; MANOHAR SHARMA, Vedula; RATHNAKAR REDDY, Kura; MADHANMOHAN REDDY, Musku; VL SUBRAHMANYAM, Lanka; PREM KUMAR, Mamnoor; WO2011/61590; (2011); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.124391-75-9,(S)-(Tetrahydrofuran-3-yl)methanol,as a common compound, the synthetic route is as follows.

Example 162A Toluene-4-sulfonic acid tetrahydro-furan-3-ylmethyl ester To a solution of tetrahydro-3-furanmethanol (Aldrich, 1.0 mL, 10.4 mmol) in 5 mL CH2Cl2 and 5 mL pyridine was added para-toluenesulfonyl chloride (3.0 g, 15.6 mmol) portion-wise over 15 minutes. This mixture stirred at ambient temperature for 3 hours then 5 mL H2O was added. The layers were separated and the aqueous layer was extracted 2*5 mL CH2Cl2. The combined organics were dried over Na2SO4, filtered, concentrated under reduced pressure and dried under vacuum (~1 mm Hg) to afford the title compound (2.62 g, 10.2 mmol, 98percent yield). 1H NMR (300 Mhz, CDCl3) delta ppm 1.49-1.63 (m, 1 H) 1.94-2.08 (m, 1 H) 2.46 (s, 3 H) 2.52-2.68 (m, 1 H) 3.49 (dd, J=9.16, 5.09 Hz, 1 H) 3.64-3.84 (m, 3 H) 3.88-4.03 (m, 2 H) 7.36 (d, J=8.14 Hz, 2 H) 7.76-7.82 (m, 2 H); MS (DCI/NH3) m/z 257 (M+H)+., 124391-75-9

The synthetic route of 124391-75-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Florjancic, Alan S.; Dart, Michael J.; Ryther, Keith B.; Perez-Medrano, Arturo; Carroll, William A.; Patel, Meena V.; Tietje, Karin Rosemarie; Li, Tongmei; Kolasa, Teodozyj; Gallagher, Megan E.; Peddi, Sridhar; Frost, Jennifer M.; Nelson, Derek W.; US2008/58335; (2008); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

97-99-4, (Tetrahydrofuran-2-yl)methanol is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of (R)-tetrahydrofurfuryl alcohol (Lancaster, 1.0 g, 9.8 mmol) in 5 mL of CH2Cl2 and 5 mL of pyridine was added p- toluenesulfonyl chloride (2.8 g, 14.7 mmol) in portions over 15 minutes. The mixture was stirred at ambient temperature for 3 hours and was quenched with 10 mL of saturated, aqueous NaHCO3. The layers were separated and the aqueous layer was extracted with three 5 mL portions OfCH2Cl2. The combined organic extracts were dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure to afford the title compound. MS (DCI/NH3) m/z 257 (M+H)+, 274 (M+NH4)+, 97-99-4

97-99-4 (Tetrahydrofuran-2-yl)methanol 7360, aTetrahydrofurans compound, is more and more widely used in various fields.

Reference£º
Patent; ABBOTT LABORATORIES; WO2009/67613; (2009); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

17347-61-4, 2,2-Dimethylsuccinicanhydride is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step F: Intermediate 27-1 To a solution of the intermediate 26-1 (26 mg, 0.037 mmol) in anhydrous pyridine (2 mL) were added D AP (22.42 mg, 0.184 mmol) and 3,3-dimethy[dihydro-2,5-furandione (47 mg, 0.367 mmol). After stirring at 80 ¡ãC overnight, the reaction mixture was diluted with EtOAc (30 mL). The organic phase was washed with aqueous HCI (2 N, 10 mL), brine (20 mL), dried over sodium sulfate and evaporated to dryness in vacuo to provide a residue, which was purified by column chromatography on silica gel (Hex:EtOAc = 4:1 ) to afford the intermediate 27-1 (15 mg, 48.9 percent) as a white foam. LC/MS: m/z calculated 835.4, found 858.4 (M + Na)+., 17347-61-4

The synthetic route of 17347-61-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GLAXOSMITHKLINE LLC; GAO, Daxin; HAN, Nianhe; JOHNS, Brian; JIN, Zhimin; NING, Fangxian; TANG, Jun; WU, Yongyong; YANG, Heping; WO2013/20245; (2013); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

204512-95-8, (S)-Tetrahydrofuran-3-amine hydrochloride is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2-Chloro-N-(5-hydroxy-2-adamantyl)-4-propan-2-yloxypyrimidine-5-carboxamide (Intermediate 39, 560 mg, 1.53 mmol), and (S)-tetrahydrofuran-3-amine hydrochloride (284 mg, 2.30 mmol) were suspended in butyronitrile (12 mL). DIPEA (0.533 mL, 3.06 mmol) was added and the mixture was sealed into a microwave vial. The reaction was heated to 150 C. for 2.5 h in the microwave reactor, then was cooled to RT. The reaction mixture was diluted with EtOAc and washed with sat. brine. The organic layer was dried over MgSO4 and concentrated. The crude product was purified by preparative HPLC to afford the title compound (149 mg, 23%); 1H NMR (400 MHz) 1.38 (6H, d), 1.47 (2H, d), 1.68 (8H, m), 1.90 (1H, m), 2.02 (3H, d), 2.13 (1H, m), 3.55 (1H, s), 3.70 (1H, dd), 3.77-3.94 (2H, m), 3.95-4.01 (1H, m), 4.39 (2H, m), 5.50 (1H, hept), 7.66 (1H, d), 7.92 (1H, m), 8.60 (1H, s); m/z MH+=417; HPLC tR=1.58 min., 204512-95-8

The synthetic route of 204512-95-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTRAZENECA AB; US2011/92526; (2011); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.184950-35-4,(Tetrahydrofuran-3-yl)methanamine hydrochloride,as a common compound, the synthetic route is as follows.

5- {3- [5- (2,2-difluoro-1,3-benzodioxolanyl)] propyl} isoxazole-3-carboxylic acid (0.58 g, 2.0 mmol) Tetrahydrofuran-3-ylmethylamine hydrochloride (0.33 g, 2.4 mmol), Triethylamine (0.25 g, 2.4 mmol) And 1-hydroxybenzotriazole (0.03 g, 0.24 mmol) Was added to chloroform (amylene added product) (5 mL). To the mixture, 1-Ethyl-3- (3-dimethylaminopropyl) carbodiimide hydrochloride (0.46 g, 2.4 mmol) was added at room temperature, After stirring overnight, And concentrated under reduced pressure. Dilute hydrochloric acid was added to the concentrate, Extracted twice with ethyl acetate. The organic layer was washed with saturated brine, After drying with anhydrous sodium sulfate, And concentrated under reduced pressure. The residue was subjected to silica gel column chromatography, Represented by the following equation N- (tetrahydrofuran-3-ylmethyl) -5- [5- (2,2-difluoro-1,3-benzodioxolanyl) propyl] isoxazole-3-carboxamide (Hereinafter referred to as present amide compound (231)) 0.57 g was obtained.

184950-35-4, As the paragraph descriping shows that 184950-35-4 is playing an increasingly important role.

Reference£º
Patent; SUMITOMO CHEMICAL COMPANY LIMITED; SUMITA, YUSUKE; (264 pag.)JP2015/51963; (2015); A;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4100-80-5,3-Methyldihydrofuran-2,5-dione,as a common compound, the synthetic route is as follows.

5,6-Diamino-1,3-dimethylpyrimidine-2,4(1H,3H)-dione (7.46 g, 43.82 mmol) and 3-methyldihydrofuran-2,5-dione (5.0 g, 43.82 mmol) were combined in DMF (15 mL). The reaction was stirred at room temperature for 30 min then ethyl acetate (150 mL) was added. The tan solid that precipitated was collected and washed with ethyl acetate (2*50 mL) and high vacuum dried for 6 h to give a mixture of 4-((6-amino-1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)amino)-3-methyl-4-oxobutanoic acid and 4-((6-amino-1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)amino)-2-methyl-4-oxobutanoic acid (10.1 g, 81percent yield) as a tan solid that were used without purification. A mixture of 4-((6-Amino-1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)amino)-3-methyl-4-oxobutanoic acid and 4-((6-amino-1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)amino)-2-methyl-4-oxobutanoic acid (2.0 g, 7.04 mmol) were dissolved in 2N sodium hydroxide (18 mL) and heated at 85¡ã C. for 3 h. The reaction was cooled in an ice bath and 2N HCl was added until pH=2. Then 2 N sodium hydroxide was added to bring the mixture to pH to 6. The reaction was concentrated under reduced pressure. The residues were diluted with ethanol (100 mL) and filtered. The filtrate containing a mixture of 3-(1,3-dimethyl-2,6-dioxo-2,3,6,7-tetrahydro-1H-purin-8-yl)-2-methylpropanoic acid and 3-(1,3-dimethyl-2,6-dioxo-2,3,6,7-tetrahydro-1H-purin-8-yl)butanoic acid was used directly in the next step.

4100-80-5, As the paragraph descriping shows that 4100-80-5 is playing an increasingly important role.

Reference£º
Patent; HYDRA BIOSCIENCES, INC.; Chenard, Bertrand L.; Gallaschun, Randall J.; Kimball, Spencer David; US2014/275528; (2014); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

184950-35-4, (Tetrahydrofuran-3-yl)methanamine hydrochloride is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Production Example 148 (0468) Tetrahydrofuran-3-ylmethylamine hydrochloride (250 mg, 1.82 mmol) and a 1 mol/L aqueous sodium hydroxide solution (20 mL) were simultaneously added to a toluene solution (20 mL) of 5-(1-phenylcyclopropyl)isoxazole-3-carboxylic acid chloride (< 1.83 mmol), under ice-water cooling. The mixture was vigorously stirred for 30 minutes under ice-water cooling, and then the reaction mixture was extracted twice with ethyl acetate. The organic layer was washed with saturated saline water, dried over anhydrous sodium sulfate, and then concentrated under reduced pressure. The residue was applied to a silica gel column chromatography to obtain 504 mg of N-(tetrahydrofuran-3-ylmethyl)-5-(1-phenylcyclopropyl)isoxa zole-3-carboxamide (hereinafter, referred to as Compound of Present Invention (156)) represented by the following formula. 1H-NMR(CDCl3, TMS, delta(ppm)):1.41-1.46(m, 2H), 1.60-1.70(m, 3H), 2.01-2.11(m, 1H), 2.49-2.59(m, 1H), 3.39-3.44(m, 2H), 3.56(dd, J=8.9, 5.3Hz, 1H), 3.71-3.78(m, 1H), 3.80-3.92(m, 2H), 6.13(s, 1H), 6.86(brs, 1H), 7.29-7.42(m, 5H), 184950-35-4

184950-35-4 (Tetrahydrofuran-3-yl)methanamine hydrochloride 17750392, aTetrahydrofurans compound, is more and more widely used in various fields.

Reference£º
Patent; Sumitomo Chemical Company, Limited; MITSUDERA, Hiromasa; AWASAGUCHI, Kenichiro; AWANO, Tomotsugu; UJIHARA, Kazuya; EP2952096; (2015); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

184950-35-4, (Tetrahydrofuran-3-yl)methanamine hydrochloride is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5- (2-bromobenzyloxymethyl) isoxazole-3-carboxylic acid (0.94 g, 3.0 mmol), Tetrahydrofuran-3-ylmethylamine hydrochloride (0.62 g, 4.5 mmol), Triethylamine (0.46 g, 4.5 mmol) And 1-hydroxybenzotriazole (0.04 g, 0.3 mmol) Was added to chloroform (amylene added product) (7.5 mL). To the mixture, 1-Ethyl-3- (3-dimethylaminopropyl) carbodiimide hydrochloride (0.69 g, 3.6 mmol) was added at room temperature, Stir overnight And then concentrated under reduced pressure. Dilute hydrochloric acid was added to the residue, and the mixture was extracted three times with ethyl acetate. The organic layer was washed with saturated aqueous sodium hydrogencarbonate solution and saturated brine, dried over anhydrous sodium sulfate, and concentrated under reduced pressure. The residue was subjected to silica gel column chromatography to obtain N- (tetrahydrofuran-3-ylmethyl) -5- (2-bromobenzyloxymethyl) isoxazole-3-carboxamide (hereinafter referred to as present amide compound (265) ) 0.23 g was obtained., 184950-35-4

184950-35-4 (Tetrahydrofuran-3-yl)methanamine hydrochloride 17750392, aTetrahydrofurans compound, is more and more widely used in various fields.

Reference£º
Patent; SUMITOMO CHEMICAL COMPANY LIMITED; SUMITA, YUSUKE; (264 pag.)JP2015/51963; (2015); A;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

97-99-4, (Tetrahydrofuran-2-yl)methanol is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 89 Synthesis of (R)-4-amino-N-[4-(methoxymethyl)phenyl]-7-(1-methylcyclopropyl)-6-((tetrahydrofuran-2-yl)methoxy)-7H-pyrrolo[2,3-d]pyrimidine-5-carboxamide 721 muL of (R)-(-)-tetrahydrofurfuryl alcohol was added to a suspension of 371 mg of sodium hydride (60%) in 15 mL of DMF with stirring at ice cooling temperature. The mixture was then stirred at room temperature for 30 minutes. A solution of 800 mg of 4-amino-6-bromo-N-[4-(methoxymethyl)phenyl]-7-(1-methylcyclopropyl)-7H-pyrrolo[2,3-d]pyrimidine-5-carboxamide shown in Example 55 in 5 mL of DMF was added to the mixture, and stirred at 80 C. overnight. After cooling, the reaction mixture was partitioned between ethyl acetate and water, and the organic layer was washed with water and a saturated aqueous sodium chloride solution, followed by drying over sodium sulfate and solvent removal. The residue was purified by silica gel column (ethyl acetate/methanol=1/0->8/1), thereby obtaining 644 mg of the title compound., 97-99-4

97-99-4 (Tetrahydrofuran-2-yl)methanol 7360, aTetrahydrofurans compound, is more and more widely used in various fields.

Reference£º
Patent; TAIHO PHARMACEUTICAL CO., LTD.; MIYAZAKI, Isao; SHIMAMURA, Tadashi; KATO, Masanori; FUJITA, Hidenori; IGUCHI, Satoru; (161 pag.)US2018/9818; (2018); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem