Tag: M.W:100-200

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17347-61-4,2,2-Dimethylsuccinicanhydride,as a common compound, the synthetic route is as follows.

General procedure: A mixture of the above intermediates (8, 9, 10 or 11), 2,2-dimethylsuccinic anhydride (10 equiv) and DMAP (1 equiv) in anhydrous pyridine (20 mL/mmol) was refluxed overnight. The mixture was then concentrated under vacuum and the residue was chromatographed on silica gel to yield the derivatives 12, 13, 14 and 15., 17347-61-4

As the paragraph descriping shows that 17347-61-4 is playing an increasingly important role.

Reference£º
Article; Coric, Pascale; Turcaud, Serge; Souquet, Florence; Briant, Laurence; Gay, Bernard; Royer, Jacques; Chazal, Nathalie; Bouaziz, Serge; European Journal of Medicinal Chemistry; vol. 62; (2013); p. 453 – 465;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.184950-35-4,(Tetrahydrofuran-3-yl)methanamine hydrochloride,as a common compound, the synthetic route is as follows.

5- [3- (2-naphthyl) propyl] isoxazole-3-carboxylic acid (0.56 g, 2.0 mmol) Tetrahydrofuran-3-ylmethylamine hydrochloride (0.33 g, 2.4 mmol), Triethylamine (0.25 g, 2.4 mmol) And 1-hydroxybenzotriazole (0.03 g, 0.24 mmol) Was added to chloroform (amylene added product) (5 mL). To the mixture, 1-Ethyl-3- (3-dimethylaminopropyl) carbodiimide hydrochloride (0.46 g, 2.4 mmol) was added at room temperature, After stirring overnight, And concentrated under reduced pressure. Dilute hydrochloric acid was added to the concentrate, Extracted twice with ethyl acetate. The organic layer was washed with saturated brine, After drying with anhydrous sodium sulfate, And concentrated under reduced pressure. The residue was subjected to silica gel column chromatography, Represented by the following equation N- (tetrahydrofuran-3-ylmethyl) -5- [3- (2-naphthyl) propyl] isoxazole-3-carboxamide (Hereinafter referred to as the present amide compound (228)) 0.49 g was obtained., 184950-35-4

The synthetic route of 184950-35-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SUMITOMO CHEMICAL COMPANY LIMITED; SUMITA, YUSUKE; (264 pag.)JP2015/51963; (2015); A;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17347-61-4,2,2-Dimethylsuccinicanhydride,as a common compound, the synthetic route is as follows.

To a stirred solution of ((1R,3aS,5aR,5bR,7aR,9S,11aR,11bR,13aR,13bR)-9- hydroxy-5a,5b,8,8,11a-pentamethyl-1-(1-methylcyclopropyl)icosahydro-1H-cyclopenta[a]chrysen-3a-yl)(piperidin-1-yl)methanone (step 2, 0.16 g, 0.29 mmol, 1.0 eq) in ethyl acetate (2 ml) 2,2-dimethylsuccinicanhydride (0.114 g, 0.89 mmol, 3.0 eq) and DMAP (0.109 g, 0.89 mmol, 3.0 eq) were added sequentially then refluxed at about 100 ¡ãC for overnight. After completion of the reaction monitored by TLC, the reaction mixture was cooled to 0 ¡ãC, acidified with 1.0 N citric acid solution, organic layer was separated and extracted with ethyl acetate (2×30 ml). The combined organic layers were washed with water, brine solution, dried over Na2S04, filtered, evaporated and purified by silicagel column chromatography using 10percent EtOAc: hexane as eluent to afford the title compound (50 mg, 25percent yield) as an off-white solid. 1H NMR (300 MHz, DMSO-d6): delta 12.1 (s, 1H), 4.37 (dd, 1H, J= 10.8, 4.8 Hz), 3.52-3.37 (m, 4H), 2.82-2.72 (m, 1H), 2.45-2.39 (m, 2H), 2.12-2.04 (m, 1H), 1.98-1.85 (m, 2H), 1.70-1.50 (m, 8H), 1.48-1.28 (m, 12H), 1.28-1.22 (m, 5H), 1.18-1.15 (m, 6H), 1.12-1.07 (m, 1H), 0.95 (s, 3H), 0.90-0.73 (m, 16H), 0.37-0.27 (m, 2H), 0.23-0.13 (m, 2H); Mass: [M+H]+ 666.5 (70percent); HPLC: 98.6percent., 17347-61-4

The synthetic route of 17347-61-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; HETERO RESEARCH FOUNDATION; PANDURANGA ADULLA, Reddy; PARTHASARADHI REDDY, Bandi; MANOHAR SHARMA, Vedula; RATHNAKAR REDDY, Kura; PREM KUMAR, Mamnoor; BHASKAR REDDY, Kasireddy; NARSINGAM, Mogili; VENKATI, Mukkera; VL SUBRAHMANYAM, Lanka; MALLIKARJUN REDDY, Ravi; WO2013/160810; (2013); A2;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5061-21-2,2-Bromo-4-butanolide,as a common compound, the synthetic route is as follows.

5061-21-2, To a solution of 8.5 ml toluene, 3.03 g (25 mmol) of 2,6-dimethylphenylamine and 4.12 (25 mmol) of 3-bromo-dihydrofuran-2(3H)-one, heated to 80 C, a solution of 1.73 g (12.5 mmol) of K2CO3 in 5 ml of water was added dropwise over 5 h. After cooling, the mixture was washed with 5% solution of KHCO3 (10 ml) and water (3 * 25 ml). The organic layer was dried over Na2SO4, filtered off and the solvent removed in vacuo. The oily residue was dissolved in Et2O which crystallized slowly after a few days at 5 C; yield 3.2 g (62 %); mp 83-84 C; TLC: Rf (S1) = 0.79, Rf (S2) = 0.94; 1H NMR (CDCl3, delta ppm) 7.02 (d, J = 7.4 Hz, 2H, 3,5-Ph), 6.93 (m, 1H, 4-Ph), 4.46-4.23 (m, 2H, CH2-gamma), 4.01 (m, 1H, CH-alpha), 2.68 (m, 2H, CH2-beta), 2.40 (m, 6H, 2CH3, CH2-beta). ESI-MS (m/z) 206.0 [M+H]+. Anal. calcd for C12H15NO2: C, 70.22; H, 7.37; N, 6.82. Found: C, 69.69; H, 7.71; N, 6.84. According to 48 mp 85-86 C.

As the paragraph descriping shows that 5061-21-2 is playing an increasingly important role.

Reference£º
Article; Wieckowski, Krzysztof; Bytnar, Justyna; Bajda, Marek; Malawska, Barbara; Salat, Kinga; Filipek, Barbara; Stables, James P.; Bioorganic and medicinal chemistry; vol. 20; 21; (2012); p. 6533 – 6544,12;; ; Article; Wi?ckowski, Krzysztof; Sa?at, Kinga; Bytnar, Justyna; Bajda, Marek; Filipek, Barbara; Stables, James P.; Malawska, Barbara; Bioorganic and Medicinal Chemistry; vol. 20; 21; (2012); p. 6533 – 6544;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

42417-39-0, 3-Aminodihydrofuran-2(3H)-one hydrochloride is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,42417-39-0

The reactor was charged with 1 g of HSL ¡¤ HCl, 40 g of methanol and 0.05 g of Pt (5) / Ac, followed by NO / N2 (15 atm, 1: 1 (v / v) As above, additional H2 (6.5 atm) was added and the desmethylation reaction of HSL.HCl was performed. The product was partially recovered and the components were analyzed. The results are shown in Table 8 below.

42417-39-0 3-Aminodihydrofuran-2(3H)-one hydrochloride 445963, aTetrahydrofurans compound, is more and more widely used in various fields.

Reference£º
Patent; CJ CHEILJEDANG CORPORATION; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; YANG, YOUNG RYEOL; KIM, BYUNG SIK; KIM, JEONG HYUN; LEE, JUNG HO; SHIN, HYUN KWAN; KIM, JU NAM; CHO, KYUNG HO; (40 pag.)KR2015/118287; (2015); A;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.112372-15-3,Furo[2,3-c]pyridine-2-carboxylic acid,as a common compound, the synthetic route is as follows.

112372-15-3, A solution of 4-(piperidine-1-sulfonyl)-benzylamine (500 mg, 1.93 mmol, 1 .00 equiv, furo[2,3-c]pyridine-2-carboxylic acid (355 mg, 2.13 mmol, 1 .1 1 equiv), DIPEA (762 mg, 5,79 mmol, 3.00 equiv), and benzotriazol-1- yloxytris(dimethylamino)phosphonium hexafluorophosphate (1044 mg, 2.31 mmol, 1 .20 equiv) in DMF (5 mL) was stirred overnight at rt. The reaction was quenched by the addition of 20 mL of water. The precipitated product was collected by filtration and re-crystallized from ethanol to give 304 8 mg (40%) of the title compound as a light brown solid. NMR (300 MHz, DMSO-d6 delta 9.67-9 63 (t, J = 6 Hz, 1 H), 9.06 (s, 1 H), 8.49-8.48 (d, – 3 Hz, 1 H), 7.84-7.83 (t, ./ = 3 Hz, 1 H), 7.71 -7.69 (d, .7 = 4 Hz, 3H), 7.59-7.57 (d, J = 6 Hz, 2H), 4.60 (d, J = 6.3 Hz, 2H), 2.89-2.84 (m, 4H), 1.61 – 1 .50 (m, 4H), 1.36- 1 .34 (m, 2H). LC/MS (Method H, ESI): RT = 1 .20 min, m/z = 400.0 [M + H]

As the paragraph descriping shows that 112372-15-3 is playing an increasingly important role.

Reference£º
Patent; GENENTECH, INC.; FORMA TM, LLC; BAIR, Kenneth W.; BAUMEISTER, Timm R.; BUCKMELTER, Alexandre J.; CLODFELTER, Karl H.; DRAGOVICH, Peter; GOSSELIN, Francis; GUNZNER-TOSTE, Janet; HAN, Bingsong; LIN, Jian; LIU, Xiongcai; REYNOLDS, Dominic J.; SMITH, Chase C.; WANG, Zhongguo; ZAK, Mark; ZHANG, Yamin; ZHAO, Guiling; ZHENG, Xiaozhang; YUEN, Po-Wai; WO2013/127266; (2013); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

4100-80-5, 3-Methyldihydrofuran-2,5-dione is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4100-80-5

5,6-Diamino-1,3-dimethylpyrimidine-2,4(1H,3H)-dione (7.46 g, 43.82 mmol) and 3-methyldihydrofuran-2,5-dione (5.0 g, 43.82 mmol) were combined in DMF (15 mL). The reaction was stirred at room temperature for 30 min then ethyl acetate (150 mL) was added. The tan solid that precipitated was collected and washed with ethyl acetate (2*50 mL) and high vacuum dried for 6 h to give a mixture of 4-((6-amino-1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)amino)-3-methyl-4-oxobutanoic acid and 4-((6-amino-1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)amino)-2-methyl-4-oxobutanoic acid (10.1 g, 81percent yield) as a tan solid that were used without purification. A mixture of 4-((6-Amino-1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)amino)-3-methyl-4-oxobutanoic acid and 4-((6-amino-1,3-dimethyl-2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)amino)-2-methyl-4-oxobutanoic acid (2.0 g, 7.04 mmol) were dissolved in 2N sodium hydroxide (18 mL) and heated at 85¡ã C. for 3 h. The reaction was cooled in an ice bath and 2N HCl was added until pH=2. Then 2 N sodium hydroxide was added to bring the mixture to pH to 6. The reaction was concentrated under reduced pressure. The residues were diluted with ethanol (100 mL) and filtered. The filtrate containing a mixture of 3-(1,3-dimethyl-2,6-dioxo-2,3,6,7-tetrahydro-1H-purin-8-yl)-2-methylpropanoic acid and 3-(1,3-dimethyl-2,6-dioxo-2,3,6,7-tetrahydro-1H-purin-8-yl)butanoic acid was used directly in the next step. To a mixture of 3-(1,3-dimethyl-2,6-dioxo-2,3,6,7-tetrahydro-1H-purin-8-yl)-2-methylpropanoic acid and 3-(1,3-dimethyl-2,6-dioxo-2,3,6,7-tetrahydro-1H-purin-8-yl)butanoic acid (1.87 g, 7.02 in ethanol (100 mL) was added 2N HCl in diethyl ether (3 mL) was added and the reaction was refluxed for 15 h. The reaction was concentrated under reduced pressure to give a mixture of ethyl 3-(1,3-dimethyl-2,6-dioxo-2,3,6,7-tetrahydro-1H-purin-8-yl)-2-methylpropanoate and ethyl 3-(1,3-dimethyl-2,6-dioxo-2,3,6,7-tetrahydro-1H-purin-8-yl)butanoate (2.15 g, >100percent yield) as a golden semi-solid. LCMS retention time=2.595 min and 95percent purity, LCMS MH+ 295.

The synthetic route of 4100-80-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; HYDRA BIOSCIENCES, INC.; Chenard, Bertrand L.; Gallaschun, Randall J.; Kimball, Spencer David; US2014/275528; (2014); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

5061-21-2, 2-Bromo-4-butanolide is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5061-21-2, (Step 1) To a solution of 2-amino-5-nitrophenol (2.00 g, 13 mmol) in DMF (20 mL) were added 3-bromo-dihydrofuran-2-one and potassium carbonate (2.1 g, 15.57 mmol), and the mixture was stirred at 80C for 4 hr under nitrogen atmosphere. The reaction mixture was allowed to be cooled to room temperature, and filtered through Celite, and the filtrate was concentrated under reduced pressure. The obtained residue was dissolved in ethyl acetate, and the solution was washed with water and saturated brine, and dried over sodium sulfate, and the solvent was evaporated under reduced pressure. The obtained yellow solid was washed with pentane to give 2-(2-hydroxyethyl)-7-nitro-4H-benzo[1,4]oxazin-3-one (2.5 g, 80.9%) as a yellow solid. MS (API) :239 (M+H)

5061-21-2 2-Bromo-4-butanolide 95463, aTetrahydrofurans compound, is more and more widely used in various fields.

Reference£º
Patent; Takeda Pharmaceutical Company Limited; YAMAMOTO, Satoshi; SHIRAI, Junya; FUKASE, Yoshiyuki; SATO, Ayumu; KOUNO, Mitsunori; TOMATA, Yoshihide; OCHIDA, Atsuko; YONEMORI, Kazuko; ODA, Tsuneo; IMADA, Takashi; YUKAWA, Tomoya; (238 pag.)EP2975031; (2016); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

4100-80-5, 3-Methyldihydrofuran-2,5-dione is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,4100-80-5

EXAMPLE A284-(4-acetylaminophenyl)-2-methyl-4-oxobutanoic acid22 ml (0.28 mol) of dimethylformamide were added dropwise to 133.34 g (1.0 mol) of finely powdered aluminium chloride within 20 minutes, while cooling externally with ice. After the strongly exothermic reaction died down, 13.517 g (0.1 mol) of acetanilide and 11.413 g (0.1 mol) of methylsuccinic acid anhydride were added all at once and at an initial temperature of 60¡ã C., during which time the mixture heated up to about 80¡ã C. It was kept for another 3 hours at a temperature of 60-70¡ã C., the still hot mixture was stirred into 1 kg of crushed ice, 60 ml, of conc. hydrochloric acid were added and the mixture was left to stand overnight at ambient temperature. The precipitate formed was suction filtered and thoroughly washed with water. It was taken up in 150 ml of methanol, stirred for 30 minutes at 50¡ã C., then for another 30 minutes while cooling externally with ice and the precipitate was suction filtered. After drying in a circulating air dryer at 60¡ã C., 10.4 g (42percent of theoretical) of colourless crystals were obtained, m.p. 229-231¡ã C. and Rf 0.48 (El I).IR (KBr): 1714.6, 1662.5 cm-1 (CO)

As the paragraph descriping shows that 4100-80-5 is playing an increasingly important role.

Reference£º
Patent; Boehringer Ingelheim Pharma GmbH & Co. KG; US7230001; (2007); B1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

124391-75-9, (S)-(Tetrahydrofuran-3-yl)methanol is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 64A 3-(tosylmethyl)tetrahydrofuran To a solution of (tetrahydrofuran-3-yl)methanol (1.0 g, 9.8 mmol) in CH2Cl2 (5 mL) and triethylamine (1.98 g, 19.6 mmol) was added p-toluenesulfonyl chloride (2.8 g, 14.7 mmol) in portions over 15 minutes. The mixture was stirred at ambient temperature for 12 hours and was quenched with 10 mL of saturated, aqueous NaHCO3. The layers were separated and the aqueous layer was extracted with CH2Cl2 (2*10 mL) The combined organic extracts were dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure to afford the title compound. MS (DCI/NH3) m/z 257 (M+H)+.

124391-75-9, The synthetic route of 124391-75-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ABBOTT LABORATORIES; US2008/153883; (2008); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem