Tag: 500-600

Metabolomics analysis of time-series human small intestine lumen samples collected in vivo was written by Folz, Jacob S.;Shalon, Dari;Fiehn, Oliver. And the article was included in Food & Function in 2021.Formula: C18H32O16 This article mentions the following:

The human small intestine remains an elusive organ to study due to the difficulty of retrieving samples in a non-invasive manner. Stool samples as a surrogate do not reflect events in the upper gut intestinal tract. As proof of concept, this study investigates time-series samples collected from the upper gastrointestinal tract of a single healthy subject. Samples were retrieved using a small diameter tube that collected samples in the stomach and duodenum as the tube progressed to the jejunum, and then remained positioned in the jejunum during the final 8.5 h of the testing period. Lipidomics and metabolomics liquid chromatog. tandem mass spectrometry (LC-MS/MS) assays were employed to annotate 828 unique metabolites using accurate mass with retention time and/or tandem MS library matches. Annotated metabolites were clustered based on correlation to reveal sets of biol. related metabolites. Typical clusters included bile metabolites, food metabolites, protein breakdown products, and endogenous lipids. Acylcarnitines and phospholipids were clustered with known human bile components supporting their presence in human bile, in addition to novel human bile compounds 4-hydroxyhippuric acid, N-acetylglucosaminoasparagine and 3-methoxy-4-hydroxyphenylglycol sulfate. Food metabolites were observed passing through the small intestine after meals. Acetaminophen and its human phase II metabolism products appeared for hours after the initial drug treatment, due to excretion back into the gastrointestinal tract after initial absorption. This exploratory study revealed novel trends in timing and chem. composition of the human jejunum under standard living conditions. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Formula: C18H32O16).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF), or oxolane, is mainly used as a precursor to polymers. Being polar and having a wide liquid range, THF is a versatile solvent. Tetrahydrofuran (THF) is primarily used as a precursor to polymers including for surface coating, adhesives, and printing inks.Formula: C18H32O16

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

LC-MS/MS method validation for the quantitation of 1-kestose in wheat flour was written by Fruehwirth, Sarah;Call, Lisa;Maier, Fabiola Abigail;Hebenstreit, Vanessa;D′Amico, Stefano;Pignitter, Marc. And the article was included in Journal of Food Composition and Analysis in 2021.Application In Synthesis of (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol This article mentions the following:

Fructan anal. is challenging due to several mono-, di-, and oligosaccharides as well as starch and proteins present in wheat grains which interfere with the anal. So far, a sensitive and fully validated LC-MS/MS method is missing although even small amounts of short-chain fructans such as 1-kestose are suggested to elicit gastrointestinal symptoms in patients suffering from irritable bowel syndrome. Therefore, the aim of this study was to validate a LC-MS/MS method for the detection of 1-kestose in a complex wheat matrix according to international guidelines. The chromatog. separation was performed on a C18 column coupled with a triple quadrupole MS in MRM mode using the transition m/z 503 → m/z 119 for the quantitation of 1kestose. Accuracy of 1-kestose quantitation in an aqueous solution was 105.5%. However, the poor recovery of 64.1% in a complex wheat matrix demonstrated the great impact of proteins and other constituents present in wheat. Nevertheless, the proposed method allows precise quantification of 1-kestose amounts ≥0.1 ppm. The robustness of the method was confirmed by the results being within 6.03% of the target value. The validated method was successfully applied for the measurement of 10 different wheat samples with 1-kestose amounts between 7.0 and 50.2 ppm. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Application In Synthesis of (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofurans and furans are important oxygen-containing heterocycles that often exhibit interesting properties for biological applications or applications in the cosmetic industry. It is more basic than diethyl ether and forms stronger complexes with Li+, Mg2+, and boranes. It is a popular solvent for hydroboration reactions and for organometallic compounds such as organolithium and Grignard reagents.Application In Synthesis of (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Fructooligosaccharides production by Schedonorus arundinaceus sucrose:sucrose 1-fructosyltransferase constitutively expressed to high levels in Pichia pastoris was written by Hernandez, Lazaro;Menendez, Carmen;Perez, Enrique R.;Martinez, Duniesky;Alfonso, Dubiel;Trujillo, Luis E.;Ramirez, Ricardo;Sobrino, Alina;Mazola, Yuliet;Musacchio, Alexis;Pimentel, Eulogio. And the article was included in Journal of Biotechnology in 2018.COA of Formula: C18H32O16 This article mentions the following:

The non-saccharolytic yeast Pichia pastoris was engineered to express constitutively the mature region of sucrose:sucrose 1-fructosyltransferase (1-SST, EC 2.4.1.99) from Tall fescue (Schedonorus arundinaceus). The increase of the transgene dosage from one to nine copies enhanced 7.9-fold the recombinant enzyme (Sa1-SSTrec) yield without causing cell toxicity. Secretion driven by the Saccharomyces cerevisiae α-factor signal peptide resulted in periplasmic retention (38%) and extracellular release (62%) of Sa1-SSTrec to an overall activity of 102.1 U/mL when biomass reached (106 g/l, dry weight) in fed-batch fermentation using cane sugar for cell growth. The volumetric productivity of the nine-copy clone PGFT6x-308 at the end of fermentation (72 h) was 1422.2 U/l/h. Sa1-SSTrec purified from the culture supernatant was a monomeric glycoprotein optimally active at pH 5.0-6.0 and 45-50. The removal of N-linked oligosaccharides by Endo Hf treatment decreased the enzyme stability but had no effect on the substrate and product specificities. Sa1-SSTrec converted sucrose (600 g/l) into 1-kestose (GF₂) and nystose (GF₃) in a ratio 9:1 with their sum representing 55-60% (weight/weight) of the total carbohydrates in the reaction mixture Variations in the sucrose (100-800 g/l) or enzyme (1.5-15 units per g of substrate) concentrations kept unaltered the product profile. Sa1-SSTrec is an attractive candidate enzyme for the industrial production of short-chain fructooligosaccharides, most particularly 1-kestose. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9COA of Formula: C18H32O16).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives.Tetrahydrofuran has many industry uses as a solvent including in natural and synthetic resins, high polymers, fat oils, rubber, polymer. THF can also be synthesized by catalytic hydrogenation of furan. This allows certain sugars to be converted to THF via acid-catalyzed digestion to furfural and decarbonylation to furan, although this method is not widely practiced. THF is thus derivable from renewable resources.COA of Formula: C18H32O16

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Role of root exudates on assimilation of phosphorus in young and old Arabidopsis thaliana plants was written by Pantigoso, Hugo A.;Yuan, Jun;He, Yanhui;Guo, Qinggang;Vollmer, Charlie;Vivanco, Jorge M.. And the article was included in PLoS One in 2020.Electric Literature of C18H32O16 This article mentions the following:

The role of root exudates has long been recognized for its potential to improve nutrient use efficiency in cropping systems. However, studies addressing the variability of root exudates involved in phosphorus solubilization across plant developmental stages remain scarce. Here, we grew Arabidopsis thaliana seedlings in sterile liquid culture with a low, medium, or high concentration of phosphate and measured the composition of the root exudate at seedling, vegetative, and bolting stages. The exudates changed in response to the incremental addition of phosphorus, starting from the vegetative stage. Specific metabolites decreased in relation to phosphate concentration supplementation at specific stages of development. Some of those metabolites were tested for their phosphate solubilizing activity, and 3-hydroxypropionic acid, malic acid, and nicotinic acid were able to solubilize calcium phosphate from both solid and liquid media. In summary, our data suggest that plants can release distinct compounds to deal with phosphorus deficiency needs influenced by the phosphorus nutritional status at varying developmental stages. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Electric Literature of C18H32O16).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF) is a Lewis base that bonds to a variety of Lewis acids such as I2, phenols, triethylaluminum and bis(hexafluoroacetylacetonato)copper(II). Tetrahydrofuran can also be produced, or synthesised, via catalytic hydrogenation of furan. This process involves converting certain sugars into THF by digesting to furfural. An alternative to this method is the catalytic hydrogenation of furan with a nickel catalyst.Electric Literature of C18H32O16

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

A γ-glutamylcysteine ligase AcGCL alleviates cadmium-inhibited fructooligosaccharides metabolism by modulating glutathione level in Allium cepa L. was written by Luo, Wei;Long, Yuming;Feng, Zili;Li, Rui;Huang, Xiaojia;Zhong, Jiaxin;Liu, Dongyun;Zhao, Hongbo. And the article was included in Journal of Hazardous Materials in 2021.Formula: C18H32O16 This article mentions the following:

Fructooligosaccharides (FOS) are important carbohydrates in plants. Cadmium (Cd) toxicity limits growth and development in several plant species. Whether FOS metabolism is affected by Cd and the mol. mechanisms of tolerance of the effects of Cd toxicity in plants remain enigmatic. In the present study, FOS metabolism was analyzed under Cd stress in onion (Allium cepa L.). Results showed that Cd stress can inhibit FOS accumulation in onion, followed by the upregulation of a putative onion γ-glutamylcysteine ligase gene AcGCL. Heterologous expression of the AcGCL protein in Escherichia coli revealed that this recombinant enzyme has GCL activity. Furthermore, overexpressing AcGCL significantly increased glutathione (GSH) accumulation in young onion roots under Cd treatment, accompanied by increased phytochelatin (PC) amount, and increased transcript expression of GSH synthetase (GS), and phytochelatin synthase (PCS) genes. Notably, compared with control, overexpressing AcGCL ameliorated Cd phytotoxicity on onion FOS metabolism, which correlated with increased FOS synthesis. Taken together, these results suggest that the function of AcGCL as a γ-glutamylcysteine ligase can alleviate Cd inhibited FOS metabolism by modulating GSH levels in onion. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Formula: C18H32O16).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF), or oxolane, is mainly used as a precursor to polymers. Being polar and having a wide liquid range, THF is a versatile solvent. THF (Tetrahydrofuran) is also used as a starting material for the synthesis of poly(tetramethylene ether) glycol (PTMG), etc.Formula: C18H32O16

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Bioconversion of inulin to difructose anhydride III by a novel inulin fructotransferase from Arthrobacter chlorophenolicus A6 was written by Zhu, Yingying;Wang, Xiao;Yu, Shuhuai;Zhang, Wenli;Zhang, Tao;Jiang, Bo;Mu, Wanmeng. And the article was included in Process Biochemistry (Oxford, United Kingdom) in 2018.Category: tetrahydrofurans This article mentions the following:

The gene encoding difructose anhydride III (DFA III)-forming inulin fructotransferase (IFTase) from Arthrobacter chlorophenolicus A6 was cloned and overexpressed in Escherichia.coli. The recombinant IFTase (DFA III-forming) was purified using one-step nickel affinity chromatog. Based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration analyses, the enzyme showed a homotrimeric form composed of three identical subunits, each with an apparent mol. mass of 43 kDa. The maximum catalytic activity was shown at 65°C and pH 5.5, and the specific activity was measured as 902 U mg^-1. The enzyme showed remarkable thermostability and over half of the initial activity was retained after incubation at 80°C for 1 h. The K_m and V_max were estimated to 12.93 mM and 2.89μmol min^-1 ml^-1, resp. After complete hydrolysis of inulin for DFA III production by the purified enzyme, the produced minor products contained sucrose (GF), 1-kestose (GF₂), and nystose (GF₃). The smallest substrate was identified to be GF₃. When 50, 100, and 200 g l^-1 of inulin were hydrolyzed by the purified IFTase, the DFA III yield reached 81%, 72%, and 67%, resp. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Category: tetrahydrofurans).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofurans and furans are important oxygen-containing heterocycles that often exhibit interesting properties for biological applications or applications in the cosmetic industry. Tetrahydrofuran reaction with hydrogen sulfide: In the presence of a solid acid catalyst, tetrahydrofuran reacts with hydrogen sulfide to give tetrahydrothiophene.Category: tetrahydrofurans

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Physical and chemical properties of powder produced from spray drying of inulin component extracted from Jerusalem artichoke tuber powder was written by Jirayucharoensak, Raveeporn;Khuenpet, Krittiya;Jittanit, Weerachet;Sirisansaneeyakul, Sarote. And the article was included in Drying Technology in 2019.HPLC of Formula: 470-69-9 This article mentions the following:

In this study, inulin was extracted from Jerusalem artichoke tuber (JAT) powder and then concentrated before spray drying. The aims of this study were to (1) determine the drying condition that provided high powder yield together with superior qualities of JAT inulin powder and (2) investigate the chem. and phys. properties of inulin powder. The inulin extracts at different concentrations of 10, 20, and 30 °Brix were spray-dried and then compared. The spray drying experiments were conducted at the inlet/outlet air temperatures of 150/90, 170/90, and 190/90 °C for the chosen concentration of inulin extract It appeared that spray drying of the 30 °Brix extract at the inlet/outlet drying air temperatures of 190/90 °C resulted in the highest value of powder recovery, bulk d., water solubility and the lowest moisture content and hygroscopicity in comparison with its counterparts. SEM micrographs showed that the powder produced by this condition was more stable and less sticky than others. The sugars, total fructo-oligosaccharides (1-kestose, nystose, and 1^F-β-fructofuranosyl nystose) and inulin-type fructans contents of powder were 12.88, 11.12, and 64.36 g/100 g of powder, resp. The moisture sorption data and models developed in this work could be used for determining the suitable condition of surrounding air for inulin powder storage. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9HPLC of Formula: 470-69-9).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives.Tetrahydrofuran has many industry uses as a solvent including in natural and synthetic resins, high polymers, fat oils, rubber, polymer. Tetrahydrofuran reaction with hydrogen sulfide: In the presence of a solid acid catalyst, tetrahydrofuran reacts with hydrogen sulfide to give tetrahydrothiophene.HPLC of Formula: 470-69-9

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Valorization of agro-industrial byproducts: Extraction and analytical characterization of valuable compounds for potential edible active packaging formulation was written by Grimaldi, Maria;Pitirollo, Olimpia;Ornaghi, Paola;Corradini, Claudio;Cavazza, Antonella. And the article was included in Food Packaging and Shelf Life in 2022.Quality Control of (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol This article mentions the following:

Large amounts of byproducts having high environmental impact are produced in the agro-industrial field. However, they are often rich of bioactive mols. and can represent a good source of new products. In a sustainability context, supporting Circular Economy project, this work aimed at extracting active compounds from onion, artichoke and thistle byproducts, and exploited new applications in the field of food packaging. Compound characterization achieved by chromatog. techniques demonstrated the presence of valuable ingredients such as quercetin and chlorogenic acid, and prebiotic carbohydrates. A high content of total phenolic compounds was evaluated mainly in artichoke and onion byproducts, and the addition of the extracts to oil samples showed a significant increase of oxidative stability, measured by Oxitest, even higher than 100% respect to blank oil. An active film based on the use of edible substances has been realized, and preliminary data about its application on food products showed promising developments. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Quality Control of (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF) is a Lewis base that bonds to a variety of Lewis acids such as I2, phenols, triethylaluminum and bis(hexafluoroacetylacetonato)copper(II). Commercial tetrahydrofuran contains substantial water that must be removed for sensitive operations, e.g. those involving organometallic compounds. Although tetrahydrofuran is traditionally dried by distillation from an aggressive desiccant, molecular sieves are superior.Quality Control of (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Lipase-catalyzed synthesis of fatty acid esters of trisaccharides was written by Gonzalez-Alfonso, Jose L.;Casas-Godoy, Leticia;Arrizon, Javier;Arrieta-Baez, Daniel;Ballesteros, Antonio O.;Sandoval, Georgina;Plou, Francisco J.. And the article was included in Methods in Molecular Biology (New York, NY, United States) in 2018.Formula: C18H32O16 This article mentions the following:

Carbohydrate fatty acid esters have a broad spectrum of applications in the food, cosmetic, and pharmaceutical industries. The enzyme-catalyzed acylation is significantly more selective than the chem. process and is carried out at milder conditions. Compared with mono- and disaccharides, the acylation of trisaccharides has been less studied. However, trisaccharide esters display notable bioactive properties, probably due to the higher hydrophilicity of the sugar head group. In this chapter, we describe the acylation of two trisaccharides, maltotriose and 1-kestose, catalyzed by different immobilized lipases, using vinyl esters as acyl donors. To illustrate the potential of such compounds, the antitumor activity of 6′′-O-palmitoyl-maltotriose is shown. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Formula: C18H32O16).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF), or oxolane, is mainly used as a precursor to polymers. Being polar and having a wide liquid range, THF is a versatile solvent. Tetrahydrofuran reaction with hydrogen sulfide: In the presence of a solid acid catalyst, tetrahydrofuran reacts with hydrogen sulfide to give tetrahydrothiophene.Formula: C18H32O16

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Biotechnological purification of a β-fructofuranosidase (β-FFase) from Aspergillus tamarii kita: Aqueous two-phase system (PEG/Citrate) and biochemical characterization was written by Matias da Silva Batista, Juanize;Pedrosa Brandao-Costa, Romero Marcos;Barbosa Cardoso, Kethylen Barbara;Nascimento, Thiago Pajeu;Albuquerque, Wendell W. C.;Carneiro da Cunha, Marcia Nieves;Porto, Camila Souza;Bezerra, Raquel Pedrosa;Figueiredo Porto, Ana Lucia. And the article was included in Biocatalysis and Agricultural Biotechnology in 2021.SDS of cas: 470-69-9 This article mentions the following:

β-Fructofuranosidases (EC3.2.1.26) are members of the GH32 family of glycoside hydrolases, which include more than 390 enzymes of vegetable and microbial origins, used in several biotechnol. applications. Thus, this research aimed to produce a β-fructofuranosidase obtained by Aspergillus tamarii through solid state fermentation, and to purify by Aqueous Two-Phase System (ATPS). Summary results presented the optimal parameters to produce the β-fructofuranosidase used wheat bran as a substrate at 30°C for 48 h, and purification process using ATPS with polyethylene glycol and sodium citrate (PEG/sodium citrate), where the β-fructofuranosidase preferably partitioned to the salt-rich phase, the best run (24% of PEG 400, 20% sodium citrate, pH 8) which presented a higher purification factor 6.42 with 12.39 U/mL activity and 352% yield. Optimum parameter was pH 5.15 and temperature of 55°C, resp. The purified enzyme showed excellent thermal stability and exhibited a half-life of 60 min at 65°C. Kinetics results for enzyme showed for Sucrose substrate the enzyme showed K_m of 42.9 ± 2.21 mM and V_max of 180.2 ± 2.8μM min^-1 mg^-1 of protein. Although Vmax was the highest for 1-Kestose (219.4 ± 2.7μM min^-1 mg^-1 of protein) the preferred substrate of Aspergillus tamariiβ-fructofuranosidase (b-FFase) was Nystose (Km of 3.8 ± 0.15 mM). SDS-PAGE revealed a single band of protein at ∼66 kDa. Finally, this study demonstrated the potential of ATPS to purify a β-fructofuranosidase with application in biotechnol. field aiming to functional foods. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9SDS of cas: 470-69-9).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. THF (Tetrahydrofuran) is a stable compound with relatively low boiling point and excellent solvency. THF (Tetrahydrofuran) is also used as a starting material for the synthesis of poly(tetramethylene ether) glycol (PTMG), etc.SDS of cas: 470-69-9

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem