Heterocyclic Building Blocks-Tetrahydrofuran

NMR of sucrose octaacetate was written by Xu, Min;Zhang, Gao;Wang, Min-chang;Qi, Zhu-chai. And the article was included in Guangpu Shiyanshi in 2012.SDS of cas: 126-14-7 This article mentions the following:

The chem. structure of sucrose octaacetate was analyzed by NMR techniques (including ¹H NMR, ¹³C NMR, ¹H-¹H COSY, HSQC, HMBC), and the signal of H NMR, C NMR was accurately assigned, and the results provided the important basis for synthesis and quality control of sucrose octaacetate. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7SDS of cas: 126-14-7).

(2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF) is a Lewis base that bonds to a variety of Lewis acids such as I2, phenols, triethylaluminum and bis(hexafluoroacetylacetonato)copper(II). THF can also be synthesized by catalytic hydrogenation of furan. This allows certain sugars to be converted to THF via acid-catalyzed digestion to furfural and decarbonylation to furan, although this method is not widely practiced. THF is thus derivable from renewable resources.SDS of cas: 126-14-7

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Boryl Radicals Enabled a Three-Step Sequence to Assemble All-Carbon Quaternary Centers from Activated Trichloromethyl Groups was written by Zhao, Qiang;Li, Bin;Zhou, Xi;Wang, Zhao;Zhang, Feng-Lian;Li, Yuanming;Zhou, Xiaoguo;Fu, Yao;Wang, Yi-Feng. And the article was included in Journal of the American Chemical Society in 2022.Synthetic Route of C12H20O6 This article mentions the following:

Here, a straightforward three-step sequence that uses a range of readily accessible activated trichloromethyl groups as the carbon source, the three C-Cl bonds of which were selectively functionalized to introduce three alkyl chains was described. In each step, only a single C-Cl bond was cleaved with the choice of an appropriate Lewis base-boryl radical as the promoter. A vast range of diversely substituted all-carbon quaternary centers could be accessed directly from these activated CCl₃ trichloromethyl groups or by simple derivatizations. The use of different alkene traps in each of the three steps enabled facile collections of a large library of products. The utility of this strategy was demonstrated by the synthesis of variants of two drug mols., whose structures could be easily modulated by varying the alkene partner in each step. The results of kinetic and computational studies enabled the design of the three-step reaction and provided insights into the reaction mechanisms. In the experiment, the researchers used many compounds, for example, (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5Synthetic Route of C12H20O6).

(3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF), or oxolane, is mainly used as a precursor to polymers. Being polar and having a wide liquid range, THF is a versatile solvent. THF can also be synthesized by catalytic hydrogenation of furan. This allows certain sugars to be converted to THF via acid-catalyzed digestion to furfural and decarbonylation to furan, although this method is not widely practiced. THF is thus derivable from renewable resources.Synthetic Route of C12H20O6

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Synthesis of a truncated tetradenolide was written by Davila Garcia, Alvaro;Bernes, Sylvain;Sartillo-Piscil, Fernando;Meza-Leon, Rosa Luisa. And the article was included in Journal of Heterocyclic Chemistry in 2020.Application of 582-52-5 This article mentions the following:

The enantiopure synthesis of a truncated tetradenolide is presented. Starting from the versatile chiron 7,3-lactone-xylofuranose derivative (7,3-LXF, I), the enantiomerically pure synthesis of the title compound (II) is obtained in six steps with a 40% overall yield. In the experiment, the researchers used many compounds, for example, (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5Application of 582-52-5).

(3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5) belongs to tetrahydrofuran derivatives. THF (Tetrahydrofuran) is water-miscible and has a low viscosity making it a highly versatile solvent used in a variety of industries. THF can also be synthesized by catalytic hydrogenation of furan. This allows certain sugars to be converted to THF via acid-catalyzed digestion to furfural and decarbonylation to furan, although this method is not widely practiced. THF is thus derivable from renewable resources.Application of 582-52-5

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

α-Selective glycosidation of D-tagatofuranose with a 3,4-O-isopropylidene protection was written by Makura, Yui;Ueda, Atsushi;Matsuzaki, Takashi;Minamino, Tetsuo;Tanaka, Masakazu. And the article was included in Tetrahedron in 2019.Related Products of 582-52-5 This article mentions the following:

An α-selective glycosidation reaction of D-tagatofuranose was successfully achieved using 3,4-O-isopropylidene-protected D-tagatofuranose as a glycosyl donor. A variety of glycosyl acceptors, including primary, secondary, and β-amino alcs., and carbohydrates, can be used for this D-tagatofuranosidation reaction with complete α-selectivities and good yields (57-83%). The stereochemistries at the anomeric positions were determined by nuclear Overhauser effect spectroscopic correlations, as well as comparison of the chem. shifts in the ¹³C NMR spectra. In the experiment, the researchers used many compounds, for example, (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5Related Products of 582-52-5).

(3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5) belongs to tetrahydrofuran derivatives.Tetrahydrofuran has many industry uses as a solvent including in natural and synthetic resins, high polymers, fat oils, rubber, polymer. Oxidations have also proved to be valuable and efficient approaches to chiral tetrahydrofuran derivatives.Related Products of 582-52-5

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

A versatile approach to the synthesis of glycans containing mannuronic acid residues was written by Alex, Catherine;Visansirikul, Satsawat;Demchenko, Alexei V.. And the article was included in Organic & Biomolecular Chemistry in 2021.Safety of (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol This article mentions the following:

Reported herein is a new method for a highly effective synthesis of β-glycosides from mannuronic acid donors equipped with the 3-O-picoloyl group. The stereocontrol of glycosylations was achieved by means of the H-bond-mediated aglycon delivery (HAD). The method was utilized for the synthesis of a tetrasaccharide linked via β-(1→3)-mannuronic linkages. We have also investigated 3,6-lactonized glycosyl donors that provided moderate to high β-manno stereoselectivity in glycosylations. A method to achieve complete α-manno stereoselectivity with mannuronic acid donors equipped with 3-O-benzoyl group is also reported. In the experiment, the researchers used many compounds, for example, (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5Safety of (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol).

(3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5) belongs to tetrahydrofuran derivatives. THF (Tetrahydrofuran) is water-miscible and has a low viscosity making it a highly versatile solvent used in a variety of industries. THF (Tetrahydrofuran) is also used as a starting material for the synthesis of poly(tetramethylene ether) glycol (PTMG), etc.Safety of (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Photoinduced triiodide-mediated [3+2] cycloaddition of N-tosyl aziridines and alkenes was written by Li, Yuanbo;Chen, Fan;Zhu, Shengqing;Chu, Lingling. And the article was included in Organic Chemistry Frontiers in 2021.SDS of cas: 582-52-5 This article mentions the following:

A metal-free photoinduced triiodide-mediated [3+2] cycloaddition of N-Ts aziridines I (R¹ = Ph, 2-naphthyl, 4-fluorophenyl, etc.) with alkenes R²CH=CH₂ (R² = 4-bromophenyl, 2-naphthyl, benzofuran-5-yl, 4-methylthiazol-5-yl, etc.) is described. This operationally simple protocol utilized bench-stable and inexpensive TBAI as a radical mediator, enabling regioselective access to substituted pyrrolidines II with good functional group compatibility. Preliminary mechanistic experiments disclosed that TBAI₃, generated in situ from TBAI, promoted the crucial radical ring-opening of N-Ts aziridines I. In the experiment, the researchers used many compounds, for example, (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5SDS of cas: 582-52-5).

(3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF) is a Lewis base that bonds to a variety of Lewis acids such as I2, phenols, triethylaluminum and bis(hexafluoroacetylacetonato)copper(II). It is more basic than diethyl ether and forms stronger complexes with Li+, Mg2+, and boranes. It is a popular solvent for hydroboration reactions and for organometallic compounds such as organolithium and Grignard reagents.SDS of cas: 582-52-5

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Apoplastic maize fructan exohydrolase Zm-6-FEH displays substrate specificity for levan and is induced by exposure to levan-producing bacteria was written by Huang, Xiaojia;Luo, Wei;Wu, Silin;Long, Yuming;Li, Rui;Zheng, Fenghua;Greiner, Steffen;Rausch, Thomas;Zhao, Hongbo. And the article was included in International Journal of Biological Macromolecules in 2020.Name: (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol This article mentions the following:

Fructan exohydrolases (FEHs) are structurally related to cell wall invertases. While the latter are ubiquitous in higher plants, the role of FEHs in non-fructan species has remained enigmatic. To explore possible roles of FEHs in maize, a full length putative Zm-6-FEH-encoding cDNA was cloned displaying high sequence similarity with cell wall invertases. For functional characterization, Zm-6-FEH protein was expressed in Picha pastoris and in Nicotiana benthamiana leaves. Enzyme activity of recombinant Zm-6-FEH protein showed a strong preference for levan as substrate. Expression profiling in maize seedlings revealed higher transcript amounts in the more mature leaf parts as compared to the growth zone at the base of the leaf, in good correlation with FEH enzyme activities. Subcellular localization anal. indicated Zm-6-FEH location in the apoplast. Noteworthy, incubation of leaf disks with levan and co-incubation with high levan-producing bacteria selectively up-regulated transcript levels of Zm-6-FEH, accompanied by an increase of 6-FEH enzyme activity. In summary, the results indicate that Zm-6-FEH, a novel fructan exohydrolase of a non-fructan species, may have a role in plant defense against levan-producing bacteria. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Name: (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. THF (Tetrahydrofuran) is a stable compound with relatively low boiling point and excellent solvency. THF can also be synthesized by catalytic hydrogenation of furan. This allows certain sugars to be converted to THF via acid-catalyzed digestion to furfural and decarbonylation to furan, although this method is not widely practiced. THF is thus derivable from renewable resources.Name: (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Combining Mass Spectrometry and NMR Improves Metabolite Detection and Annotation was written by Bhinderwala, Fatema;Wase, Nishikant;DiRusso, Concetta;Powers, Robert. And the article was included in Journal of Proteome Research in 2018.Recommanded Product: 470-69-9 This article mentions the following:

Despite inherent complementarity, NMR spectroscopy (NMR) and mass spectrometry (MS) are routinely sep. employed to characterize metabolomics samples. More troubling is the erroneous view that metabolomics is better served by exclusively using MS. Instead, the authors demonstrate the importance of combining NMR and MS for metabolomics by using small chem. compound treatments of Chlamydomonas reinhardtii as an illustrative example. A total of 102 metabolites were detected (82 by gas chromatog.-MS, 20 by NMR, and 22 by both techniques). Out of these, 47 metabolites of interest were identified: 14 metabolites were uniquely identified by NMR, and 16 metabolites were uniquely identified by GC-MS. A total of 17 metabolites were identified by both NMR and GC-MS. In general, metabolites identified by both techniques exhibited similar changes upon compound treatment. In effect, NMR identified key metabolites that were missed by MS and enhanced the overall coverage of the oxidative pentose phosphate pathway, Calvin cycle, tricarboxylic acid cycle, and amino acid biosynthetic pathways that informed on pathway activity in central carbon metabolism, leading to fatty-acid and complex-lipid synthesis. The authors’ study emphasizes a prime advantage of combining multiple anal. techniques: the improved detection and annotation of metabolites. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Recommanded Product: 470-69-9).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofurans and furans are important oxygen-containing heterocycles that often exhibit interesting properties for biological applications or applications in the cosmetic industry. Tetrahydrofuran (THF) is primarily used as a precursor to polymers including for surface coating, adhesives, and printing inks.Recommanded Product: 470-69-9

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Chemoenzymic synthesis of 1′-photo-reactive sucrose derivatives via ether linkage was written by Tsunekawa, Yuka;Masuda, Katsuyoshi;Muto, Miho;Muto, Yasuyuki;Murai, Yuta;Hashidoko, Yasuyuki;Orikasa, Yoshitake;Oda, Yuji;Hatanaka, Yasumaru;Hashimoto, Makoto. And the article was included in Heterocycles in 2012.Reference of 126-14-7 This article mentions the following:

As the 1′-hydroxyl group of sucrose is well known to be less reactive than other primary alcs., there are no reports on the substitution of a phenoxy group at this position. Chemo-enzymic synthesis of photoreactive 1′-phenoxy-substituted sucrose was examined to elucidate the functional anal. of sweet receptors. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7Reference of 126-14-7).

(2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7) belongs to tetrahydrofuran derivatives.Tetrahydrofuran has many industry uses as a solvent including in natural and synthetic resins, high polymers, fat oils, rubber, polymer. Tetrahydrofuran (THF) is primarily used as a precursor to polymers including for surface coating, adhesives, and printing inks.Reference of 126-14-7

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Utilization of GC-MS untargeted metabolomics to assess the delayed response of glufosinate treatment of transgenic herbicide resistant (HR) buffalo grasses (Stenotaphrum secundatum L.) was written by Boonchaisri, Siriwat;Stevenson, Trevor;Dias, Daniel A.. And the article was included in Metabolomics in 2020.SDS of cas: 470-69-9 This article mentions the following:

A major aim of this present work is to characterize and evaluate the metabolic alterations which may arise from a genetic transformation of HR buffalo grasses by comprehensively using gas chromatog.-mass spectrometry (GC-MS) based untargeted metabolomics. Plants were either sprayed with 1, 5, 10 and 15% volume/volume of glufosinate to evaluate the visual injuries or submerged in 5% volume/volume of glufosinate 3 days prior to a GC-MS based untargeted metabolomics anal. Results identified 199 metabolites with only 6 of them (cis-aconitic acid, allantoin, cellobiose, glyceric acid, maltose and octadecanoic acid) found to be statistically significant (p < 0.05) between the HR and wild type buffalo grass varieties compared to the control experiment As expected, glufosinate treatment caused significant metabolic alterations in sensitive wild type, with the up-regulation of several amino acids (e.g. phenylalanine and isoleucine) which was likely due to glufosinate-induced senescence. The aminoacyl-tRNA biosynthetic pathway was identified as the most significant enriched pathway as a result of glufosinate effects because a number of its intermediates were amino acids. The current metabolomics analyses not only confirmed the effects of glufosinate to up-regulate free amino acid pools in the sensitive wild type but also several alterations in sugar, sugar phosphate and organic acid metabolism have been reported. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9SDS of cas: 470-69-9).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF), or oxolane, is mainly used as a precursor to polymers. Being polar and having a wide liquid range, THF is a versatile solvent. Tetrahydrofuran can also be produced, or synthesised, via catalytic hydrogenation of furan. This process involves converting certain sugars into THF by digesting to furfural. An alternative to this method is the catalytic hydrogenation of furan with a nickel catalyst.SDS of cas: 470-69-9

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem