Category: Tetrahydrofurans

3123-97-5, 5,5-Dimethyldihydrofuran-2(3H)-one is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of the Compound 1 (5.13 g) and the Compound 2 (1.3 mE) in methanol (45 mE) was added dropwise concentrated sulfuric acid (350 pL), and the resulting mixture was stirred at 50¡ã C. for 2 hours. To the reaction mixture was added a saturated aqueous solution of sodium hydrogen carbonate at room temperature to alkali1,? the mixture, and chloroform was added thereto, and the resulting mixture was stirred. The resulting organic layers were separated, then washed with saturated brine, dried, andconcentrated under reduced pressure. The resulting residues were purified by silica gel column chromatography (hexane:ethyl acetate=97:3 to 85:15) to give the Compound 3 (6.2 g) as a pale yellow liquid. 1H-NMR (CDC13) oe 1.15 (s, 6H), 1.80-1.84 (m, 2H), 2.34-2.38 (m, 2H), 3.17 (s, 3H), 3.67 (s, 3H)

3123-97-5, 3123-97-5 5,5-Dimethyldihydrofuran-2(3H)-one 18398, aTetrahydrofurans compound, is more and more widely used in various.

Reference£º
Patent; MITSUBISHI TANABE PHARMA CORPORATION; SATO, Atsushi; IMASHIRO, Ritsuo; TSUJISHIMA, Hidekazu; TANIMOTO, Kouichi; YAMAMOTO, Yasuo; NAKANE, Tetsu; TOSHIKAWA, Chihiro; (118 pag.)US2018/258076; (2018); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

165253-29-2, 3-(Bromomethyl)tetrahydrofuran is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

165253-29-2, Example 106 Preparation of 3-(3-(3-(4-chloro-3,5-dimethylphenoxy)propyl)-7-(3,5-dimethyl-l- ((tetrahydrofuran-3-yl)methyl)-lH-pyrazol-4-yl)-2-methyl-lH-indol-l-yl)propanoic acid Title compound was prepared (5.0 mg, 0.008 mmol) according to procedures described in Example 105 by using 3-(3-(3-(4-chloro-3,5-dimethylphenoxy)propyl)-7-(3,5-dimethyl-lH- pyrazol-4-yl)-2-methyl-lH-indol-l-yl)propanoic acid (25 mg, 0.05 mmol), cesium carbonate (82.4 mg, 0.25 mmol) and 3-(bromomethyl)tetrahydrofuran (16 mu,, 0.15 mmol). MS (ES) 578.2 (M+H), tR: 1.480 min.

The synthetic route of 165253-29-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; VANDERBILT UNIVERSITY; LEE, Taekyu; KIM, Kwangho; CHRISTOV, Plamen P.; BELMAR, Johannes; BURKE, Jason P.; OLEJNICZAK, Edward T.; FESIK, Stephen W.; WO2015/31608; (2015); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

219823-47-9, (R)-Tetrahydrofuran-3-yl 4-methylbenzenesulfonate is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

4-(3-(6-Hydroxypyridin-3-yl)-4,4-dimethyl-5-oxo-2-thioxoimidazolidin-1-yl)-2-(trifluoromethyl)benzonitrile 10c (100 mg, 0.24 mmol) was placed in a reaction flask, followed by addition of (R)-tetrahydrofuran-3-yl-4-methylbenzenesulfonate 2a (116 mg, 0.48 mmol), cesium carbonate (235 mg, 0.72 mmol), and 3 mL of N,N-dimethylacetamide, successively. The reaction solution was warmed up to 60 C. and stirred for 2 hours. The reaction solution was cooled down to room temperature, mixed with 10 mL of saturated sodium chloride solution, and extracted with ethyl acetate (20 mL*3). The organic phases were combined, dried over anhydrous sodium sulfate, and filtered. The filtrate was concentrated under reduced pressure, and the residue was purified by thin layer chromatography with elution system A to obtain the title compound (S)-4-(4,4-dimethyl-5-oxo-3-(6-((tetrahydrofuran-3-yl)oxy)pyridin-3-yl)-2-thioxoimidazolidin-1-yl)-2-(trifluoromethyl)benzonitrile 24 (60 mg, yield 52.6%) as a white solid. MS m/z (ESI): 477.2 [M+1]; 1H NMR (400 MHz, CDCl3): delta 8.09-8.08 (m, 1H), 8.00-7.96 (m, 2H), 7.86-7.84 (m, 1H), 7.54-7.51 (m, 1H), 6.92-6.90 (m, 1H), 5.63-5.60 (m, 1H), 4.14-3.91 (m, 4H), 2.35-2.16 (m, 2H), 1.60 (s, 6H).

219823-47-9, The synthetic route of 219823-47-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Shanghai Hengrui Pharmaceutical Co., Ltd.; Jiangsu Hengrui Medicine Co., Ltd.; Lu, Hejun; Sun, Piaoyang; Fei, Hongbo; Jiang, Hongjian; Wang, Haowei; Dong, Qing; US2015/225381; (2015); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

97-99-4, (Tetrahydrofuran-2-yl)methanol is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,97-99-4

Example 1 : Lambda/-((2S)-5-{[(2/?)-tetrahydro-2-furanylmethyl]oxy}-2,3-dihydro-1H-inden-2- yl)-2-propanesulfonamide; To a solution of Lambda/-[(2S)-5-hydroxy-2,3-dihydro-1 H-inden-2-yl]-2-propanesulfonamide (300 mg, 1.175 mmol, Description 3) and (2R)-tetrahydro-2-furanylmethanol (0.125 ml, 1.292 mmol) in dichloromethane (6 ml) was added DIAD (0.228 ml, 1.175 mmol) followed by triphenylphosphine (308 mg, 1.175 mmol). The reaction mixture was stirred at 25 0C overnight. 75 mul of (2/?)-tetrahydro-2-furanylmethanol, 0.115 ml of DIAD and 150 mg of triphenylphosphine were added to the reaction mixture which was stirred at room temperature overnight again.Solvent was removed and the residue was partitioned between water (10 ml) and EtOAc (30 ml). The aqueous phase was further extracted with EtOAc (30 ml). Organics were dried over MgSO4 and concentrated to give crude product which was purified by reverse phase chromatography using the MDAP. Relevant fractions were combined and concentrated to give the title compound as a white solid (170 mg).LC/MS (ES): Found 340 (ES+), retention time 0.97 mins (2 minute method). C17H25NO4S requires 339.1H NMR (400 MHz, MeOH-d4) delta 1.35 (d, J=6.8 Hz, 6 H), 1.69 – 1.85 (m, 1 H), 1.86 – 2.14(m, 3 H), 2.73 – 2.93 (m, 2 H), 3.10 – 3.28 (m, 3 H), 3.76 – 3.84 (m, 1 H), 3.85 – 3.97 (m, 3H), 4.16 (quintet, J=7.5 Hz, 1 H), 4.19 – 4.26 (m, 1 H), 6.73 (dd, J=8.0, 2.4 Hz, 1 H), 6.78(s, 1 H), 7.06 (d, J=8.3 Hz, 1 H).

The synthetic route of 97-99-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GLAXO GROUP LIMITED; WARD, Simon, E; BERTHELEME, Nicolas; WO2010/37760; (2010); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

79-50-5, 3-Hydroxy-4,4-dimethyldihydrofuran-2(3H)-one is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,79-50-5

A mixture of 29.5 g of pantolactone, 300 mg of ruthenium (III) chloride, 400 ml of water and 200 ml of ethyl acetate was heated with stirring to reflux temperature by applying a microwave field generated from a microwave reactor (Ethos 1600, available from MLS GmbH, D-88299 Leutkirch im Allgau, Germany) having a power output of 700 W. 145.5 g of sodium (meta) periodate were added to the boiling mixture within 10 minutes. The reaction mixture was then stirred for a further 20 minutes and thereafter rapidly cooled. The organic phase was separated from the aqueous phase and the sodium iodate precipitate in the former phase filtered off by suction and washed five times with 20 ml quantities of ethyl acetate. The two-phase mixture was separated and the aqueous phase extracted twice with 50 ml of ethyl acetate. The combined organic phases were dried over anhydrous magnesium sulphate, filtered and evaporated under reduced pressure. Ketopantolactone was thus obtained in a purity of 98% and a yield of 60% based on starting pantolactone. From the aqueous phase an additional 12% of product could be isolated. Unreacted pantolactone was recovered from the aqueous phase. Following this procedure an 80% conversion of the starting pantolactone into ketopantolactone and a selectivity of 0.95 could be achieved.

The synthetic route of 79-50-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ROCHE VITAMINS AG; WO2003/91235; (2003); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

53662-85-4, Methyl tetrahydrofuran-3-carboxylate is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,53662-85-4

To an ice-cooled solution of methyl tetrahydrofuran-3-carboxylate (50 g, 0.385 mol) and acetonitrile (47 g, 1.154 mol) in tetrahydrofuran (500 mL) was added potassium ieri-butoxide (129 g, 1.15 mol) portion- wise. The resulting mixture was warmed to room temperature and stirred for 1 h. The reaction mixture was poured into saturated aqueous ammonium chloride solution (1 L) and extracted with ethyl acetate (3 x 400 mL). The collected organic layers were washed with saturated aqueous sodium chloride solution (400 mL), dried over sodium sulfate, and concentrated in vacuo to afford product (41 g, crude, 76.6% yield).

The synthetic route of 53662-85-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; ESTRADA, Anthony; LIU, Wen; PATEL, Snahel; SIU, Michael; WO2014/111496; (2014); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

5061-21-2, 2-Bromo-4-butanolide is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5061-21-2

General procedure: Anhydrous K2CO3 (1 equiv.) was added to the solution of relevant amine (1 equiv.) in 20 mL of solvent (acetonitrile, DCM or Me2CO) and the mixture was stirred at room temperature for 0.5 h. Then a solution of 3-bromodihydrofuran-2(3H)-one (1 equiv.) in 5 mL of appropriate solvent was added dropwise and stirring was continued for 3-20 h. In the synthesis of compounds 11 and 12 tetrabutylammonium bromide (TBAB) (0.1 equiv.) was added. After the reaction was completed, the precipitate was filtered off and the filtrate was concentrated under vacuum. Obtained crude products were recrystallized from suitable solvent (solid) or purified by column chromatography (oil). Lactone 11 was isolated as a hydrochloride salt and recrystallized from DCM. Synthesis of compound 13 was described elsewhere [24] B. Malawska and S. Gobaille, Pharmazie 50 (1995), pp. 390-393. View Record in Scopus | Cited By in Scopus (10)[24].

The synthetic route of 5061-21-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Kulig, Katarzyna; Wickowski, Krzysztof; Wickowska, Anna; Gajda, Justyna; Pochwat, Bart?omiej; Hoefner, Georg C.; Wanner, Klaus T.; Malawska, Barbara; European Journal of Medicinal Chemistry; vol. 46; 1; (2011); p. 183 – 190;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5061-21-2,2-Bromo-4-butanolide,as a common compound, the synthetic route is as follows.,5061-21-2

EXAMPLE VI 2-Azido-gamma-butyrolactone 1.56 g (10 mmol) of 2-bromo-gamma-butyrolactone are dissolved in 2 ml of dimethylformamide and treated at 0 C. with 612 mg (12.5 mmol) of lithium azide. The mixture is stirred at room temperature for 2 h, treated with water and extracted three times with methylene chloride. The combined organic phases are washed three times with water, dried over sodium sulphate and concentrated. 1.10 g (86.6% of theory) of the title compound are obtained. MS: 127

The synthetic route of 5061-21-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Bayer Aktiengesellschaft; US6194428; (2001); B1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.453-20-3,3-Hydroxytetrahydrofuran,as a common compound, the synthetic route is as follows.,453-20-3

To a solution of tetrahydro-furan-3-ol (9.0 g, 79 mmol) and triethyl amine (20 mL, 176 mmol) in THF (200 mL) was added methanesulfonyl chloride (12.9 g, 1 13 mmol) at 0C. The mixture was stirred overnight and then evaporated to dryness. The residue was extracted with EtOAc (3 x 300 mL) and washed with saturated, aqueous NaHC03. The organic layer was dried over Na2S04 and evaporated to dryness to give methanesulfonic acid tetrahydro-furan-3-yl ester as a yellow viscous liquid (12.4 g, 94%) which was used without further purification.

The synthetic route of 453-20-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; H. LUNDBECK A/S; ESKILDSEN, J¡ãrgen; WO2014/49133; (2014); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.19311-37-6,3-Bromotetrahydrofuran,as a common compound, the synthetic route is as follows.,19311-37-6

4,4?-Di-tert-butyl-2,2?-bipyridine (16.10 mg, 0.06 mmol, 0.6 equiv.) and 1,2-dimethoxyethane -dichloronickel (1:1) (10.99 mg, 0.05 mmol, 0.5 equiv.) were charged under argon in a flask and suspended in dry 1 ,2-dimethoxyethane (10 ml). This mixture was sonicated for 5 mm. In a separated microwave vial under argon Iridium( 1+), [4,4?-bis( 1,1 -dimethylethyl)-2,2?-bipyridine-icNl ,icNl ?]bis [3,5- difluoro-2- [5-(trifluoromethyl)-2-pyridinyl-icN]phenyl-icC] -, (OC-6-3 3)-, hexafluorophosphate( 1-) (1:1) (CAS 870987-63-6) (5.61 mg, 5.00 jimol), N-[5-(7-bromo-4-oxoquinazolin-3(4H)-yl)-2- (trifluoromethoxy)phenyl] -1 -(4-methylpiperazin- 1 -yl)cyclopropanecarboxamide (56.6 mg, 100 jimol),and lithium hydroxide (4.79 mg, 200 jimol) were charged in a 2 mL vial. 1 mL of the nickel pre-catalyst solution was syringed into the vial containing the reaction mixture. The solution was degassed a second time by sparging with argon while stirring for 10 minutes. Under a constant flow of argon, 3- bromotetrahydrofurane (racemate) (14 jil, 150 jimol) and 1,1,1,3,3,3-hexamethyl-2- (trimethylsilyl)trisilane (31 jil, 100 jimol) were added to the reaction mixture using a Hamilton syringe.The reaction mixture was iffadiated with one 34 W blue LED lamp in the EvoluChemTM PhotoChemistry Device using the 8 x 2 mL vial rack which contains an incorportated fan for cooling to maintain the experiment at room temperature. The reaction mixture was then allowed to stir in the device for 15 hours. The reaction mixture was charged completely on a silica gel column and a chromatographic separation was performed with a gradient of dichloromethane/methanol from 100:0 to90:10. The material obtained was purified by preparative RP-HPLC on a 125x30mm column with acetonitrile/water (0.2% ammonia) to provide 10.0 mg (96 % purity, 17 % yield) of the title compound.LC-MS (Method 2): R = 1.88 mm; MS (ESIpos): m/z = 558 [M+H]1HNMR (500 MHz, DMSO-d6) [ppm]: -0.007 (1.09), 0.007 (0.77), 1.106 (1.50), 1.115 (4.03), 1.122 (4.31), 1.129 (1.98), 1.237 (1.98), 1.245 (4.44), 1.251 (3.60), 1.261 (1.50), 1.908 (0.53), 1.968 (0.47),1.983 (1.12), 1.992 (0.62), 1.999 (1.14), 2.008 (1.32), 2.014 (0.54), 2.024 (1.29), 2.039 (0.54), 2.194(16.00), 2.359 (0.43), 2.362 (0.50), 2.366 (0.46), 2.375 (0.89), 2.384 (1.03), 2.391 (1.41), 2.400 (1.97),2.406 (1.52), 2.409 (1.46), 2.415 (2.29), 2.425 (2.09), 2.431 (2.27), 2.453 (4.01), 2.519 (0.66), 2.523(0.54), 3.249 (1.47), 3.265 (1.68), 3.286 (1.08), 3.577 (0.40), 3.592 (1.13), 3.607 (1.72), 3.622 (1.37),3.636 (0.55), 3.651 (2.79), 3.667 (2.88), 3.681 (1.82), 3.813 (1.07), 3.828 (2.52), 3.844 (2.88), 3.859(1.21), 3.981 (1.12), 3.990 (1.19), 3.997 (2.06), 4.007 (2.02), 4.014 (0.95), 4.023 (0.88), 4.079 (2.08),4.094 (2.64), 4.095 (2.57), 4.110 (1.82), 7.374 (2.49), 7.379 (2.51), 7.391 (2.59), 7.396 (2.80), 7.528(2.04), 7.531 (2.08), 7.545 (2.10), 7.548 (2.20), 7.629 (3.95), 7.633 (3.60), 7.677 (1.95), 7.680 (1.86),7.691 (0.78), 7.694 (1.63), 7.697 (1.50), 8.127 (4.08), 8.143 (3.73), 8.352 (9.84), 8.365 (0.76), 8.584(4.25), 8.589 (4.19), 10.650 (3.53).

The synthetic route of 19311-37-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BAYER AKTIENGESELLSCHAFT; BAYER PHARMA AKTIENGESELLSCHAFT; JIMENEZ, NUNEZ, Eloisa; BORISSOFF, Julian; HAHN, Michael; DIETZ, Lisa; ZDENKA, GAUGAZ, Fabienne; BENDER, Eckhard; LANG, Dieter; GIESE, Anja; THEDE, Kai; ZORN, Ludwig; BOULTADAKIS ARAPINIS, Melissa; (190 pag.)WO2019/63708; (2019); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem