Category: 17347-61-4

17347-61-4, 2,2-Dimethylsuccinicanhydride is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step F: Intermediate 27-1 To a solution of the intermediate 26-1 (26 mg, 0.037 mmol) in anhydrous pyridine (2 mL) were added D AP (22.42 mg, 0.184 mmol) and 3,3-dimethy[dihydro-2,5-furandione (47 mg, 0.367 mmol). After stirring at 80 ¡ãC overnight, the reaction mixture was diluted with EtOAc (30 mL). The organic phase was washed with aqueous HCI (2 N, 10 mL), brine (20 mL), dried over sodium sulfate and evaporated to dryness in vacuo to provide a residue, which was purified by column chromatography on silica gel (Hex:EtOAc = 4:1 ) to afford the intermediate 27-1 (15 mg, 48.9 percent) as a white foam. LC/MS: m/z calculated 835.4, found 858.4 (M + Na)+., 17347-61-4

The synthetic route of 17347-61-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; GLAXOSMITHKLINE LLC; GAO, Daxin; HAN, Nianhe; JOHNS, Brian; JIN, Zhimin; NING, Fangxian; TANG, Jun; WU, Yongyong; YANG, Heping; WO2013/20245; (2013); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17347-61-4,2,2-Dimethylsuccinicanhydride,as a common compound, the synthetic route is as follows.

A stirring solution of compound 24-1 (55 mg, 0.10 mmol), DMAP (14.8 mg, 0.12 mmol) and 2,2-dimethylsuccinic anhydride (38.7 mg, 0.30 mmol) in dry pyridine (1.0 mL) is heated at 1200C for 4 hours. Another 0.30 mmol of 2,2-dimethylsuccinic anhydride is added and heating at 12O0C is continued for 24 hours. The mixture is cooled down to room temperature and concentrated to dryness. The residue is diluted in ethyl acetate, washed twice with HCl 1 N, water and brine, dried over sodium sulfate and concentrated to dryness. The residue is purified by flash column chromatography on silica gel (methanol/ DCM 0percent to 10percent) to yield the title compound 19-2 as a white solid (48 mg, 71percent). 1H NMR (400 MHz, CDCl3): delta [ppm] 7.71 (m, 2H), 7.50 (m, 1 H), 7.42 (m, 2H), 6.11 (s, 1 H), 4.48 (d x d, 1 H), 3.17 (m, 1 H), 2.90 (d, 1 H), 2.83 (d, 1 H), 2.66 (d, 1 H), 2.55 (d, 1 H), 2.41 (d, 1 H), 2.36 (d, 1 H), 1.95 (m, 3H), 1.76 – 1.16 (m, 26H), 1.13 (s, 3H), 0.97 (s, 3H), 0.87 (s, 3H), 0.83 (s, 3H), 0.79 (s, 3H). LC/MS: m/z = 674.70 (M+H+).

17347-61-4, As the paragraph descriping shows that 17347-61-4 is playing an increasingly important role.

Reference£º
Patent; VIROCHEM PHARMA INC.; WO2009/82819; (2009); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17347-61-4,2,2-Dimethylsuccinicanhydride,as a common compound, the synthetic route is as follows.

l-(2-aminoethyl)piperidin-2-one hydrobromide (178.2 mg, 0.8 mmol) was dissolved in DMF (0.9 mL). DIPEA (417 pL, 3.0 equiv.) was added, followed by 2,2- dimethylsuccinic anhydride (133 mg, 1.3 equiv.). The reaction mixture was agitated at ambient temperature for 12 hours and then directly purified by preparative HPLC (H20/MeCN with 0.1% TFA) to afford 51.7 mg (24% yield) of acid 1-170 as a white solid. ESI-MS found 271.2. C13H23N2O4 (MH+) requires 271.2., 17347-61-4

As the paragraph descriping shows that 17347-61-4 is playing an increasingly important role.

Reference£º
Patent; CARMOT THERAPEUTICS, INC.; ENQUIST, Johan; KRISHNAN, Shyam; ATWAL, Suman; ERLANSON, Daniel; FUCINI, Raymond V.; HANSEN, Stig; SAWAYAMA, Andrew; SETHOFER, Steven; (719 pag.)WO2019/183577; (2019); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

17347-61-4, 2,2-Dimethylsuccinicanhydride is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

17347-61-4, Intermediate C: Ethyl 3-(5-methoxy-1H-benzo[d]imidazol-2-yl)-2,2-dimethylpropanoate To a 100 mL round-bottomed flask were added a stir bar, 4-methoxy-o-phenylenediamine bis-hydrochloride salt (2 g, 9.5 mmol), acetonitrile (20 mL), triethylamine (2.6 mL, 19 mmol), and 3,3-dimethyldihydrofuran-2,5-dione (1.2 g, 9.5 mmol). After 1 h, the mixture was concentrated to dryness and ethanol (50 mL) followed by HCl (1 mL, 12 N) was added to the residue. The reaction vessel was heated at 80¡ã Celsius for 12 hours before cooling to RT. The reaction mixture was concentrated to dryness. The residue was diluted with water (50 mL) and neutralized with sat. NaHCO3 until pH was 6.8-7. The aqueous was extracted with diethyl ether (3*100 mL), the combined extracts dried over sodium sulfate, filtered and concentrated to dryness. The residue was subjected to FCC to give the title compound (1.5 g, 57percent). MS (ESI): mass calcd. for C15H20N2O3, 276.15; m/z found, 277.1 [M+H]+. A mixture of two tautomer’s was observed so peaks are listed for identification purposes only. 1H NMR (600 MHz, DMSO-d6) delta 11.99-11.85 (m), 7.39 (d, J=8.7), 7.29 (d, J=8.6), 7.07 (d, J=2.4), 6.92 (d, J=2.4), 6.75 (dd, J=8.6, 2.4), 6.72 (dd, J=8.7, 2.4), 4.13-4.02 (m), 3.78-3.74 (m), 3.00-2.94 (m), 1.24-1.21 (m), 1.13 (t, J=7.1).

As the paragraph descriping shows that 17347-61-4 is playing an increasingly important role.

Reference£º
Patent; Chai, Wenying; Dvorak, Curt A.; Eccles, Wendy; Edwards, James P.; Goldberg, Steven D.; Krawczuk, Paul J.; Lebsack, Alec D.; Liu, Jing; Pippel, Daniel J.; Sales, Zachary S.; Tanis, Virginia M.; Tichenor, Mark S.; Wiener, John J. M.; US2014/275029; (2014); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17347-61-4,2,2-Dimethylsuccinicanhydride,as a common compound, the synthetic route is as follows.

To a stirred solution of (1R,3aS,5aR,5bR,7aR,9S,11aR,11bR,13aR,13bR)-9-hydroxy- 5a,5b,8,8,11a-pentamethyl-N-(1-(5-phenyl-1H-imidazol-2-yl)cyclopropyl)-1-(prop-1-en-2-yl)icosahydro-3aH-cyclopenta[a]chrysene-3a-carboxamide (Step 2 Example 19, 0.2 g, 0.31 mmol) and 2,2-dimethyl succinicanhydride (0.16 g, 1.2 mmol) in toluene (7 ml), was added DMAP (0.076 g, 0.6 mmol). The reaction mixture was heated at 90 C for 12 h. After completion of the reaction (monitored by TLC), reaction mixture was concentrated under reduced pressure, cooled to 0 C, acidified to pH = 6 with IN HCl and extracted with DCM. The combined organic extracts was washed with water, brine, dried over Na2SO4 then the solvent was evaporated under reduced pressure and to the resulting solid was recrystallized from ACN to give the title compound as a white solid (0.11 g, Yield: 45.83%). 1H NMR (300 MHz, DMSO-d6): delta 12.15 (s, 1H), 11.27 (s, 1H), 8.37 (s, 1H), 7.72-7.70 (m, 2H), 7.39 (s, 1H), 7.31-7.26 (m, 2H), 7.15-7.11 (m, 1H), 4.61 (s, 1H), 4.51 (s, 1H), 4.37-4.32 (m, 1H), 3.00-2.94 (m, 1H), 2.27 (m, 1H), 1.98-1.95 (m, 1H), 1.79-1.73 (m, 1H), 1.62-1.00 (m, 32H), 0.91-0.74 (m, 19H). ESI Mass: 766.56 [M+H]+., 17347-61-4

The synthetic route of 17347-61-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; HETERO RESEARCH FOUNDATION; BANDI, Parthasaradhi Reddy; KURA, Rathnakar Reddy; GAZULA LEVI, David Krupadanam; ADULLA, Panduranga Reddy; NEELA, Sudhakar; MOGILI, Narsingam; (87 pag.)WO2017/21922; (2017); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

17347-61-4, 2,2-Dimethylsuccinicanhydride is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a stirred solution of (1R,3aS,5aR,5bR,7aR,9S,11aR,11bR,13aR,13bR)-N-(1-(5-(4- fluorophenyl)-1H-imidazol-2-yl)cyclobutyl)-9-hydroxy-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)icosahydro-3aH-cyclopenta[a]chrysene-3a-carboxamide (Step 2, Example 15, 0.15 g, 0.22 mmol) and 2,2-dimethyl succinic anhydride (0.11 g, 0.89 mmol) in toluene (5 ml), was added DMAP (0.055 g, 0.44 mmol). The reaction mixture was heated at 90C for about 12 hours. After completion of the reaction (monitored by TLC), the reaction mixture was concentrated under reduced pressure, cooled to 0C, acidified to pH=6 with 1N HCl and extracted with DCM. The combined organic extracts were washed with water, brine, dried over Na2SO4 then the solvent was evaporated under reduced pressure and the resulting solid was recrystallized from ACN to give the title compound (0.08 g, yield: 45%). 1H MR (300 MHz, DMSO-D6): delta 12.15 (s, 1H), 11.47 (s, 1H), 8.14 (s, 1H), 7.76 (dd, J = 6.0 Hz, 8.7 Hz, 2H), 7.41 (s, 1H), 7.13 (dd, J = 8.7 Hz, 8.7 Hz, 2H), 4.60 (s, 1H), 4.50 (s, 1H), 4.37-4.31 (m, 1H), 2.94-2.91 (m, 1H), 2.65-2.32 (m, 8H), 1.99-1.01 (m, 29H), 0.90-0.68 (m, 19H); ES Mass: 798.5 [M+H]+., 17347-61-4

The synthetic route of 17347-61-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; HETERO RESEARCH FOUNDATION; BANDI, Parthasaradhi Reddy; KURA, Rathnakar Reddy; GAZULA LEVI, David Krupadanam; ADULLA, Panduranga Reddy; NEELA, Sudhakar; MOGILI, Narsingam; (87 pag.)WO2017/21922; (2017); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.17347-61-4,2,2-Dimethylsuccinicanhydride,as a common compound, the synthetic route is as follows.

A stirring solution of compound 16-2 (121 mg, 0.207 mmol), DMAP (30 mg, 0.248 mmol) and 2,2-dimethylsuccinic anhydride (80 mg, 0.620 mmol) in dry pyridine (2 mL) is heated for 6 hours at 120¡ãC. Another 80 mg (0.62 mmol) of anhydride is added and heating is continued overnight. The mixture is concentrated to dryness and the residue is diluted in ethyl acetate, washed twice with HCl 1 N, water and brine, dried over sodium sulfate and concentrated to dryness. The residue is purified by flash chromatography on silica gel (ethyl acetate/hexanes 20percent to 60percent) to give the title compound 1 1-3 as a glass (127 mg, 86percent).1H NMR (400 MHz, CDCl3): delta [ppm] 4.70 (d, 1 H), 4.60 (s, 1 H), 4.46 (m, 2H), 3.75 (s, 3H), 2.80 (m, 1 H), 2.63 (m, 1 H), 2.45 (m, 2H), 2.30 (d x d, 1 H), 2.03 (m, 1 H), 1.85 (m, 1H), 1.70-0.80 (m, 20H), 1 .67 (s, 3H), 1.26 (s, 3H), 1 .23 (s, 3H), 1.03 (s, 3H), 0.99 (s, 3H), 0.98 (s, 3H), 0.81 (s, 3H), 0.79 (s, 6H). LC/MS: m/z = 713.77 (M+H+).

17347-61-4, As the paragraph descriping shows that 17347-61-4 is playing an increasingly important role.

Reference£º
Patent; VIROCHEM PHARMA INC.; WO2009/100532; (2009); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem

17347-61-4, 2,2-Dimethylsuccinicanhydride is a Tetrahydrofurans compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

17347-61-4, Example 23: Preparation of 4-(((lS,3aS,5aR,5bR,7aR,9S, l laR,l lbR,13aR,13bR)-3a-((S)-2- (5-(4-fluorophenyl)- lH-imidazol-2-yl)pyrrolidine-l -carbonyl)- 1 -isopropyl-5a,5b,8,8, 11 a- pentamethylicosahydro-lH-cyclopenta[a]chrysen-9-yl)oxy)-2,2-dimethyl-4-oxobutanoic acid: [0205] To a stirred solution of ((S)-2-(5-(4-fluorophenyl)-lH-imidazol-2- yl)pyrrolidin-l -yl)(( 1 S,3aS,5aR,5bR,7aR,9S, 11 aR, 1 IbR, 13aR, 13bR)-9-hydroxy- 1 -isopropyl- 5a,5b,8,8, 11 a-pentamethylicosahydro-3aH-cyclopenta[a]chrysen-3a-yl)methanone (Example 22-step 2, 0.15 g, 0.22 mmol) and 2,2-dimethyl succinicanhydride (0.12 g, 0.8 mmol) in toluene (8 mL) was added DMAP (0.06 g, 0.44 mmol). The reaction mixture was heated at 90¡ãC for 12 hours. After completion of the reaction (monitored by TLC), the reaction mixture was concentrated under reduced pressure, cooled to 0¡ãC, acidified to pH = 6 with IN HC1 and extracted with DCM. The combined organic extracts was washed with water, brine, dried over Na2S04, then the solvent was evaporated and to the resulting solid was recrystalised from ACN to give the title compound (0.08 g, Yield 47percent) as a white solid. 1H-NMR (CDC13, 300 MHz): delta 7.57 (m, 2H), 7.15 (s, 1H), 7.03 (t, J = 6.9 Hz, 2H), 5.35- 5.32 (m, 1H), 4.54- 4.48 (m, 1H), 3.71- 3.69 (m, 1H), 3.55 (m, 1H), 2.97- 2.93 (m, 2H), 2.71- 2.60 (m, 3H), 2.29- 1.13 (m, 36H), 0.99- 0.82 (m, 15H), 0.73 (d, J = 6.6 Hz, 3H); ESI MS: 800.5 (M+H).

17347-61-4 2,2-Dimethylsuccinicanhydride 87067, aTetrahydrofurans compound, is more and more widely used in various fields.

Reference£º
Patent; HETERO RESEARCH FOUNDATION; PANDURANGA REDDY, Adulla; PARTHASARADHI REDDY, Bandi; RATHNAKAR REDDY, Kura; VL SUBRAHMANYAM, Lanka; DAVID KRUPADANAM, Gazula, Levi; VENKATI, Mukkera; SUDHAKAR, Neela; SRINIVAS REDDY, Kallem; WO2014/105926; (2014); A1;,
Tetrahydrofuran – Wikipedia
Tetrahydrofuran | (CH2)3CH2O – PubChem